跳至主要内容

How To Judge The Problems With Your Copier Or Printer Transfer Roller

Transfer roller is a very important part on copiers or laser printers, it’s responsible to pull the toner from the toner to the paper, poor print quality may be caused by improper working of transfer roller, the symptoms include paper jamming, streaking, noise and odor emission. If you notice the symptoms below, just try to recover the good quality same as before.


Paper Jamming
With time and use, the transfer roller on the copier or laser printer may be in incorrect position, try to remove it and replace it back to adjust correctly to ensure the paper can go trough the transfer roller normally again. If this can’t solve the problem, you probably need to replace a new roller.

Paper With Streaking
After the printer working for some time, the printout paper may come out with streaking and black spot, it is possible that the roller is not clean and comes with residual toner, use a dry cloth to wipe it gently and don’t use liquid and chemical material to clean the dirt, because these material can damage the surface of the component.

Noise
With long time use, the clips at two ends are worn and broken to cause the transfer roller to be fixed improperly, so the roller probably has rolling fiction with other components, to avoid further damage, remove the transfer roller from the printer, and replace it back correctly to the slot, and use new clips to lock it, if there is any damage or distortion on the roller, the transfer roller need to be replaced by a new one.

Odor Emission

The reasons mentioned above probably cause that the transfer roller don’t interact with other components, this is why you can smell some strange odor from the printer, so stop the print work as soon as you notice this issue, and clean the roller and reposition it. If the issue can not be solved after print some test files, you need to replace it by a new one.
标签：

评论

发表评论

此博客中的热门博文

Process Of Applying Grease in Fuser Film Sleeves

Fuser grease is made of silicone oil for lubrication, and it also has excellent performance at thermal conductivity to assist fuser film sleeve to conduct the fusing process. Just like other laser printer parts, we need to replace the grease with use and time, proper operation is very important to be careful when installing, otherwise your fuser film sleeve will be damaged and scrapped totally. Hope the following instruction can be of help to you. Step 1. Detach the fuser assembly and remove the used fuser film. Step 2. Use alcohol to clean the surface of heating element. Step 3. Use soft spatula to scoop up grease from the container, total applying amount is around 1 gram. Step 4. Place the spatula at an angle on the surface, and wipe evenly the grease over the surface of heating element with forward and backward movement. Step 5. Put the heating element into the fuser film sleeve, and the end of the film with ground ring should be in good contact with the surface of lo...
发表评论
阅读全文

Replacing Fuser Assembly For HP LaserJet P2055 - Part 2: Reassemble The Fuser Unit

Previous part we talked about disassemble the fuser unit on the HP LaserJet P2005, this time I'd like to show you how to reassemble this component. As I showed you last time, there're so many screws need to remove before you can access the fuser assembly, and conversely we need to fix them one by one on the machine after replacement, so that will take you some time to do finish. On the side of the fuser assembly , there're some driving gears that we need to pay attention of, some cutouts on it have to be in right position when slide back into its socket. Let's go ahead to reinstall the repaired or new fuser unit, don't forget to fix the screws, we got two on the left side, one at the top left and then there's one down at the bottom, and then put the metal plate on and make sure it can be fit to the left and right sides, fix it with the screws then, okay at this point in time what we can do is plug in all the wires, just don't forget to retrack the wir...
发表评论
阅读全文

Replacing Fuser Assembly For HP LaserJet P2055 - Part 1: Disassemble The Fuser Assembly

When replacing fuser assembly for your HP LaserJet P2055 printer, you can actually get this done by yourself to save your money, but it requires some time and tools, and it would be better to do it at a good work place with good light. There's a lot of processes for this work, so today I'm going to show you how to disassemble the fuser assembly. Sometimes you still have some print quality issues though you replaced the toner, such as that the paper comes out with loosen  toner or some flaws, that's part of the fuser assembly or the sleeve, so we need to know how solve the problem with the fusing unit, before we replace a new one, just need to remove the old one, but it's definitely not too easy to do it by yourself. Let's get started with a philips and a flat blade screwdriver, and a pair of nipper pliers also, turn off the power button, open the font cover plate to remove the toner cartridge inside, use the flat plate screwdriver to remove the co...
发表评论
阅读全文