What's In The Printer Maintenance Kit?

In the past 10 years, so many printer users perform replacement of their printer parts to save money and time, so the laser printer parts manufacturers supply collections of necessary parts for users to do DIY maintenance on their printer, so this is reason why we call this set as printer maintenance kit.

The parts included in the printer maintenance kit are usually fuser assembly, pickup rollers, separation pads, transfer roller and so on.

- Fuser Assembly: a component to be responsible to fuse and fix toner onto the paper.

- Separation Pad: help the pickup rollers to tug a single sheet of paper and separate it from other.

- Transfer Roller: an electrically charged roller to transfer toner from the drum to the paper.

- Pickup Roller: also named feed roller, are used to pick up the paper from the paper tray and feed it to the printing parts.

Most of printers have a system that can inform you when it's time to maintain your printer, it will show on the screen and let you know which parts you should replace.

此博客中的热门博文

Replacing Fuser Assembly For HP LaserJet P2055 - Part 2: Reassemble The Fuser Unit

Previous part we talked about disassemble the fuser unit on the HP LaserJet P2005, this time I'd like to show you how to reassemble this component. As I showed you last time, there're so many screws need to remove before you can access the fuser assembly, and conversely we need to fix them one by one on the machine after replacement, so that will take you some time to do finish. On the side of the fuser assembly , there're some driving gears that we need to pay attention of, some cutouts on it have to be in right position when slide back into its socket. Let's go ahead to reinstall the repaired or new fuser unit, don't forget to fix the screws, we got two on the left side, one at the top left and then there's one down at the bottom, and then put the metal plate on and make sure it can be fit to the left and right sides, fix it with the screws then, okay at this point in time what we can do is plug in all the wires, just don't forget to retrack the wir...

阅读全文

Difference Between Fuser Unit & Maintenance Kit

Printer fuser assembly, as known as fuser kit or fuser unit, it's the component that works with heat and pressure to melt and fix the toner particle onto the paper, such type of part need to repair or replace when your printer has printed out certain amount of pages. In addition to the fuser unit , there are other interchangeable parts that need to replace and are available on the market, such as pickup roller, separation roller, separation pad and transfer roller. Many manufacturers pack a whole set of these parts and sell them together, we usually call them as maintenance kit. Nowadays, maintenance kit is very popular solution for the printer users to maintain their printers, but there are many products by different producers on the market, so sometimes we need to pay particular attention to the quality you get from them, though good quality kit is a little more expensive, but durable and long run can low down your page cost.

阅读全文

Benefits Of Compatible Printer Parts

As you know, printer oftentimes need to do maintenance on it with time and use, that is to say, we need to have spare parts for replacement on your printer. On the market, compatible maintenance kits are available to meet users’ requirements, that include a fuser assembly, a transfer roller and some pickup rollers and separation pads, in addition, fuser film sleeve and fuser rollers inside the fuser assembly are wearing parts, so sometimes you only need to replace these little things rather than fuser assembly . All these key parts can be supplied by compatible manufacturers, nowadays, compatible parts are getting more and more quality and lower costs, so many printer users are in preference to compatible parts instead of original parts, maintaining and replacing parts properly are taken into consideration can low down much money for your office supplies every year.

阅读全文

zhprinterparts

搜索此博客